We all know how important it is to keep our cars clean not only from the outside but from the inside as well. Many times when we clean our car’s interior we tend to forget that there are many hidden spots in vehicles where all the dirt can gather easily. One such spot is the area under the car seat. Therefore when you plan to deep clean your car’s interior make sure you remove the car seats. Let us learn how to do it with DIY steps to remove the car seat while deep cleaning.
DIY Steps for Car Seat Removal
For deep cleaning, you must always remove car seats. Here’s how you can remove them effectively:
Step 1
Park your car in a spacious area or your personal garage where you can work on removing car seats without any disturbance. Keep a mechanical toolset with you.
Step 2
To remove the car seats while deep cleaning your car’s interior start with the front seat. Slide the seat to the front and locate the bolts at the back – they are usually near the rail end of the seat, some cars hide them with plastic covers.
Usually, there are two bolts at the back of the seat – different cars have different bolts including hexagonal, Torx and hex head. Remove bolts with the help of the proper tools. If you don’t have the appropriate ones, here is a list of auto tools for sale in the UAE. Next, unscrew the bolts anticlockwise and remove them. Then, remove the front bolts.
Step 3
Slide the front seat to the back and locate the front bolts. Unscrew them and keep both the back and front bolts somewhere safe. Next, remove the negative cable from your car’s battery using a wrench – this is an important step to prevent airbags from deploying. Detaching the cable leaves the car without electricity and hence the computer won’t notice any changes when you move the seat in the front and back and remove bolts.
Remember, if you don’t remove the cable, it could cause airbag failure. Most cars have jacks underneath to power the airbags and seat cooling/heating – disconnect all these cables.
Step 4
Gently remove the car seat, toss out all the dirt on the floor and vacuum the car’s carpet. If you don’t remove car seats you will miss out on spotting all the dirt that settles beneath them.
Step 5
For back seats, slide both of your hands beneath the seat and pull it off – repeat the process for both the right and left sides. Back seats are fixed with a clip when you pull the seats you will see it.
Step 6
As for the seat itself, push the seat belt buckles in and remove the seat. After you remove car seats, you will be able to deep clean your car thoroughly. Next, sanitize your car with a disinfecting spray and then spray a good air freshener. This ensures your car smells pleasant.
Step 7
Finally, install the seats back in reverse order. Don’t connect the negative cable and car battery until you plug in all other jacks/bolts and fix the seats in their place. Here are a few essential things that help cleaning your car’s interior.
That is all about how to effectively remove car seats while deep cleaning the interior. Besides, if you are willing to buy another car, explore these used cars for sale in the UAE.
Stay tuned to UAE’s top auto blog for more on car detailing, car cleaning and car DIY solutions.
Related Posts
