How To Remove Dents From a Car
For most car owners who love their car, even a small dent is unacceptable. Not to mention, anything that taints the aesthetics of your car can also have an impact on its resale value. However, if you regularly drive your car around, minor dents and scratches are almost unavoidable. The good news is that you can remove most car dents quite easily at home. Continue reading this guide to learn about the methods of removing dents from the car without damaging the paint.
Methods for Removing Small Dents From Car Body
Body deformations such as dents have a huge impact on the aesthetics and value of a car. There are several methods to remove different types of car dents, depending on the tools you have. Here is a list of some popular methods for removing dents from a car.
The Suction Cup Method

A suction cup is also a magical tool for removing dents from a car. Here is how you can do that;
- Take the suction cup and carefully press it onto the bump, then pull it out.
- Repeat this several times until the bump pops out.
- Before placing the suction cup, make sure that the edge of the pump is clean and lubricated with petroleum jelly so that you can then remove it easily.
The Use of a Hairdryer
You need the following items for this dent removal technique.
- Hairdryer
- Rubber gloves to protect your hands from injury
- Aluminium foil
- A packet of dry ice
- A can of compressed air
Step 1: You need to cover the bump with a piece of foil.
Step 2: Then apply heat on the bumpy part by using the hairdryer.
Step 3: Later on, cool down the dented area with liquefied compressed air. The rapid temperature change will allow the body to regain its shape. This method is used particularly on soft bumps.
The Boiling Water Method
This method works for dents on plastic bumpers or the parts of your vehicle that are made of plastic.
- Boil a pot of water and pour it over the dented part of your bumper.
- Reach the back of the bumper and clear the dent.
- You can also remove the bumper if you can’t reach the bump.
- Finally, pour a pot of cold water over the bumper to cool and secure the plastic area.
The Use of the Hammer

If you can access the metal plate from the inside, you can also hit the dent with a hammer to make it pop out. This is the easiest method, but you should still proceed with care, and after a few strokes the body should flatten out.
Using a Vacuum Cleaner and Bucket
Besides cleaning your car’s upholstery, a vacuum clear can also help you in removing dents from the car. For this you need to follow the below-mentioned method:
- Make a small hole in the bottom of the bucket. Make sure that the hole is smaller than the vacuum cleaner nozzle.
- Tape the nozzle of the vacuum cleaner over the hole.
- Now, put the vacuum cleaner over the dent.
- Finally, turn on the vacuum and wait until the body regains its shape.
Repair of Large Dents
To make the big dents go away, you need a complete dent removal kit. You will also need glue that does not dissolve after use. In addition, repairing large bumps requires a certain technicality, which makes this operation a professional job. You can easily buy auto accessories and parts for sale in the UAE that can help you in removing dents from a car.
- Cost: The cost of the dent removing kit in the UAE is around AED 160.
This concludes our guide on the methods of removing dents from a car. Moreover, it is important to keep in mind that when repairing dents, we have to be very careful with the car’s paint. Also, you may not be able to repair large dents without the presence of a professional. If your vehicle has some serious dents due to an accident or you are looking to buy another vehicle, then you can buy a range of used cars for sale in the UAE at reasonable rates.
Stay tuned to the UAE’s top auto blog, if you like these DIY methods of removing car dents from a car.