Car Door Seal Replacement: How and When to Replace Them
Car door seals usually get noticed when leaks appear on rainy days or when the rubber starts falling off. The car door seal does not have a specific lifespan, hence its replacement depends on the vehicle’s maintenance. In this guide, you can find all about car door seal replacement and how to replace them.
How to Perform Car Door Seal Replacement
Sometimes, we need to perform car door seal replacement when it starts making noises and you want to soundproof your car. Here is a step by step guide that can help you in installing a car door rubber seal.
How to Install Car Door Rubber Seal
- Step 1: First of all when you replace the car door seal, you need to choose the right rubber. Installing a rubber with different specifications will not give the necessary grip and won’t last long.
- Step 2: Remove the internal door panel placed on the old door seal with the help of a screwdriver.
- Step 3: Remove the old door seal by simply pulling it out from the door frame. Before placing the new rubber, clean the entire area well.
- Step 4: With the cutting pliers, remove the plastic clips that hold the corners of the door’s rubber sealing. Peel off the rubber from the door. Try to remove as much adhesive from the edges as possible.
- Step 5: Slowly rub the glue residues left on the edges of the door with the dry sponge. Then, wet the sponge in the thinner and rub carefully to remove the remaining glue.
- Step 6: Take a piece of dry burlap and clean the door frame well. Also, clean the clips fittings around the door frame.
- Step 7: Apply a thin layer of sealing adhesive where the rubber will be fitted and press firmly to keep it in place.
- Step 8: Push the plastic clips through the rubber, at the height of the clip holes in the door frame. If you need to lift any part of the seal to look for holes in the frame, add more adhesive before inserting the part back in.
- Step 9: With the tow, a little dampened with thinner, clean the glue that ran through the rubber around the frame.
Things to Consider After Finishing Car Door Seal Replacement
As the rubber is installed, always check that it fits properly, especially in the rounded corners of the door frame. The rubber is four meters long, so not all of the strip will be used to seal the door. So, cut the excess with a scissor and finish off with a hammer.
If there are rust spots on the frame or if it is misaligned because of a knock, the rubber will not be fully secured. If this is the case, before the exchange it will be necessary to carry out a small repair or bodywork to correct the defect. If the rust point is minimal, it is right to remove it with fine sandpaper.
When You Should Change the Car Door Seal
If you see holes in your car’s door seal, a patch repair rather than installing the complete seal can be a better option. However, the patch change may not last long and you need to change it again. This is why if your car’s door starts knocking while driving or you see the car door seal torn then fix the car door seal with a new one. This not only helps to reduce car noises but also protect the car’s interior.
If you are looking for cars with unique door designs then, check out the list of used cars for sale in the UAE. The popular options include:
- Used Aston Martin for sale in the UAE
- Used Rolls Royce Cullinan for sale in the UAE
- Second Hand Toyota FJ Cruiser for sale in the UAE
- Used Lamborghini Diablo for sale in the UAE
- Buy used Lamborghini Aventador in the UAE
- Used McLaren 720S for sale
- Used Mercedes Benz SLR for sale
With this, we conclude our guide on car door seal replacement. The loose car door seals can also cause problems in locking the car door. This is why you must always keep an eye on the seal, as overtime, excessive heat can dilate the rubbers causing them to increase in size or even shrink, making the seal loose.
Stay tuned to the UAE’s leading auto blogs, if you are interested in getting information on car parts and automotive technology.