A car’s wing mirrors or side mirrors allow the driver to see the side of the car to easily and safely change lanes or park the car. If your mirrors are not positioned correctly, you could have huge blind spots, which can hinder visibility and cause accidents. You can eliminate blind spots by learning how to position and use your vehicle’s mirrors correctly. In this guide, we will explain how to adjust your wing mirrors correctly.
How To Adjust Wing Mirrors for Maximum Visibility
Adjusting your car’s mirror properly helps in minimising the blind spot and keep you aware of what is happening on the road. Read on and find how to adjust the wing mirrors correctly. Besides, you can also remove the blind spots with the help of a collision avoidance system.
Adjust Your Seat
Before you adjust the car’s wing mirrors, make sure you are seated in the correct position to drive. Consult your manual if you are unsure of the location of the seat adjusters.
Move the seat forward or back, and up or down. You should be able to comfortably reach the brake pedal, accelerator and clutch. Once you have adjusted your seat, buckle your seat belt before positioning your mirrors.
Set the Position of the Mirrors
Once you adjust your car’s seat, it’s time to work on the position of the side mirrors. Before that, make sure you know your vehicle’s model well and can adjust the mirrors of the particular car. For instance, modern cars usually have electric adjustments, while some have a lever poking into the passenger cabin where the side mirror is attached to the bodywork. On the contrary, there are manual side mirrors that can be adjusted by hand.
How To Adjust Electric Wing Mirror
In case you have electric wing mirrors, adjust it with the help of a four-way power button and a mirror switcher. The button will be placed next to the steering wheel. Thus, you can easily adjust both side mirrors without moving from the driving seat. If you don’t find the power button near the steering wheel, then check the manual’s guide.
How To Adjust the Manual Wing Mirror
For manual adjustment, you can push or pull the mirror by hand until you find the correct angle. However, for the passenger’s side wing mirror, you need to lean over and adjust the mirror accordingly.
How to Find the Correct Angle of the Mirrors
- Too far in: If the car’s wing mirror is too far in, then you can see too much of the car and not the side lane. Therefore, the angle of the mirror can be out further so that you can see the lane beside you.
- Too far out: Unlike the above case, the wing mirror of your car is too far out that you can’t see which car is approaching you from the side. This position eliminates the reference point where you can see the exact position of the vehicle coming from the side.
- Just right: At this position, you can clearly see the lane beside you. This position makes sure you can see a little of the rear corner of the car. By making the side disappear just at the right point, we will be able to reduce the blind spot.
This concludes our guide on how to adjust wing mirrors correctly. You can get maximum visibility by following these instructions. With these settings and instructions, you should have no blind spots. Always adjust the car mirrors before driving. You never know if they’ve been moved or if you’ve been sitting in a different position since the last time you drove. Remember that even perfectly positioned mirrors can sometimes not eliminate all blind spots.
In case your rear or wing mirror is damaged or broken, make sure you replace it with the new one to get a clearer view while driving. You can find a range of car parts for sale in the UAE on dubizzle at market competitive rates.
If you find this guide useful, stay tuned to the UAE’s leading auto blog for more information.
Related Posts
