Tips for Motorcycle Tyre Safety
A worn-out motorcycle tyre is a huge risk and often the reason behind road accidents. It is why driving a vehicle with worn-out tyres is illegal in the UAE and you have to fines for it. Therefore, it is necessary to keep the tyres in good condition to prevent accidents and avoid fines. To clear all your doubts on the subject, we have prepared a list of significant motorcycle tyre safety tips that will help you to increase its useful life.
Checklist for Motorcycle Tyre Safety
Well-maintained motorcycle tyres ensure safer acceleration while cornering and provide better mileage. Therefore, your motorcycle tyre safety is mandatory to get the best riding experience. Let’s explore some essential motorcycle tyre safety checklists.
Buy Tyres According to the Motorcycle Model
Choosing tyres other than those recommended for your motorcycle isn’t a good idea. After all, each model has specific tyre sizes, types and shapes. Therefore, you must know how to choose them correctly. There are many models of motorcycle tyres available in the market. Always look for the ones that offer the highest quality, but the ideal is the one that is suggested by the manufacturer.
Also, using the right tyre is essential for the motorcycle’s stability. Hence, not using the right type of tyre can compromise the vehicle’s drivability.
Keep the Calibration Correct
The correct calibration of motorcycle tyres reduces the risk of puncturing them. If you drive on bumpy roads or in bad conditions, this practice is essential to reduce the chances of the wheel bending. Besides, good calibration provides your tyre with a powerful grip and, consequently increases safety when riding.
The motorcycle’s tyre inflation specifications are usually informed on a sticker pasted near the rear suspension, but you can also consult an owner’s manual. Check out some tips related to calibration:
- Before leaving home, always check the condition of the tyres.
- If it is necessary to fill them, go immediately to a tyre shop or gas station.
- If you carry some weight on the back, increase the pressure of the rear tyre. This will ensure that it runs smoothly.
- Be aware of the tyres are hot, as the heat expands the air in the tyres and changes their volume.
Park Your Bike on a Flat Surface When Possible
Among the tips on how to ensure the safety of motorcycle tyre, being aware of where you park is essential. Many motorists usually forget this caution, which can result in serious problems. You can also explore these motorcycle parking tips to ensure its safety.
For instance, uneven parking surfaces with muddy ground, sharp rocks or thick gravel can reduce the tyre’s life. In addition, greasy surfaces with split solvents or oil are also not good for parking, as these elements can wear out the tyres. Therefore, always park on a flat surface that is free of any debris or substance that could damage the tyres.
Change Tyres on Time
In general, they can run between 10,000 to 12,000 kilometres, which can vary due to several factors. The idea is to follow the manufacturer’s recommendations. However, it is also important to observe for wear ahead of time and change motorcycle tyres before they cause any damage.
Check the signs of tyre failures and wear and see if your bike is unstable from corners. These are the main signs that there is a need for maintenance or buying new tyres.
Moreover, do not forget that riding with worn or fragile tyres means that the bike will not have a good grip on the ground. This increase the chances of an accident and your tyre become more prone to puncture and tear.
Keep Your Motorcycle Tyres Align and Balance
Not only do cars go through with tyre rotation and wheel alignment but motorcycle wheels also need to go through this service, especially after the tyres are changed.
The same goes if the vehicle needed to be taken to a repair shop to dent a rim, fix a broken spoke or have the wheel bearing replaced. If the bike has fallen to the ground or you’ve had an accident, wheel alignment may become necessary.
In the case of alloy wheels, there are two balancing methods: static and dynamic. While the first is manual work, the second depends on a machine. As static balancing is cheaper and guarantees longer tyre life, it is generally the most used by motorcyclists.
Always Change Tyres with Professional Workshop
If you want to avoid unnecessary problems and expenses, always look for a qualified mechanic to change your motorcycle tyres. After all, they have the tools they need to do this job reliably and safely.
Understanding the best ways to take care of your motorcycle tyre is essential to ensure smooth and safe trips. In addition, this practice increases the tyres’ durability and adds value to the vehicle.
Now that you know how to take good care of your motorcycle, check out our guide to jump-start a motorbike.
That’s the wrap of some essential motorcycle tyre safety tips. It is important to be careful with high speeds, especially in curves. It causes overheating that generates wear on the tread. You can check tyre tread depth with a coin to avoid misalignment or disbalance. Also, never use tyres or rims that do not comply with the manufacturer’s specifications, this can compromise the entire performance of the motorcycle.
If you are planning to buy a used motorcycle in the UAE, check its tyre wear to avoid future expenses.
Keep in touch with the UAE’s leading auto blog for more motorcycle maintenance tips.